home *** CD-ROM | disk | FTP | other *** search
- Configuration for TBK 9600+, Semfor 9696A and Semafor 1496A.
- """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""
- Modem should be used with 19200 baud constant local speed.
- MNP block size is set at level that gives best response and
- highest file transfer rate (checked with Zmodem) at MNP4.
- ------------------------------------------------------------
- AT &F Reset modem to factory configuration
- AT &W0 &W1 Store factory config in both setups
- ------------------------------------------------------------
- AT B0 &C1 &D2 CCITT, DCD track on, DTR off hang up
- AT &G0 M0 (M3) Guard tone off, Loudspeaker off (on)
- ------------------------------------------------------------
- AT \A0 \C1 %C1 Block size, Handshake w/Buffer, MNP5
- AT +C1 +D0 \N3 Constant speed, No 1300 Hz, Auto-MNP
- AT \Q3 +Q3 +T1 RTS/CTS, Extra result codes, Trellis
- ------------------------------------------------------------
- AT +&T1 +S8=30 RxD Inactivity, 300 sec (5 minutes)
- AT S0=0 S2=255 Auto-Answer off, ESCape sequence off
- AT +S20=B11101110 High/low buffer levels for flow-ctrl
- ------------------------------------------------------------
- AT &W0 &W1 Store new config in both setups
- AT Z And reset modem to new config
- ------------------------------------------------------------
- ABK-BBS, The Atari BBS in Oslo: +47 67 132659, 300-14400 bps
-